Hi.
I have and NPM+SAM+NTA environment in production, I upgraded to NMP V12.01 and SAM 6.3 and have the need to deploy the high availability, i thought i did until i realized how it works, my problem is this.
I have 2 Virtual servers, made the deployment of High availability, i have a virtual IP until that point everything is ok
The primary server have 4 Interfaces with different Vlans pointing to other network subnets, this was done this way, since we have separated networks for some clients we monitor in our datacenter.
For example.
Network 1 - have the internal IP addres 10.30.xxx.xxx - this is the primary interface and have a 1 to 1 NAT to a public address, this is the "Virtual pool Address"
Network 2 - have the internal IP addres 172.30.xxx.xxx - This is the Management Network, this one goes Backups, Monitoring, replication with HA and Database connection
Network 3 - have the internal IP addres 192.168.xxx.xxx - Dedicated interface for one of our clients network
Network 4 - have the internal IP addres 172.31.xxx.xxx - Dedicated interface for one remote client network
The network 1 have the default gateway wich is a firewall
We have static routes of the network segments of Network 3 and 4, to reach those subnets through a gateway, for example in network 3 is a MPLS Router
My problem with High availability is, ¿Can the module switch those IP addreses to the secondary? i cannot put a different IP address in the secondary server, for example in Network 4, i have 250 agents pointing to the IP of the Primary server.
¿Any ideas?
Regards