Quantcast
Channel: THWACK: All Content - All Communities
Viewing all articles
Browse latest Browse all 13537

My Orion Website & Server is very slow what should i check quickly ?

$
0
0

This article provides quick information about  your current environment and health check , Further it  will help you address the most common reasons of  performance issues on to your server without sending the diagnostics to SolarWinds support  .

In this article you can also Audit your own environment quickly if its been setup as recommended by the Solarwinds MINIMUM requirements or according to the settings eliminating bottlenecks creating performance issues within the set environment .

This article also help to save time to upload the diagnostics for Support where you have air gap between the server and you can check the basic health check on the actual server itself .

There are lots of other benefits to check the environment health within the internal due to security procedure not allowing uploading the diagnostics for Solarwinds support .

 

AAEAAQAAAAAAAAS2AAAAJGU1ZjVjN2NkLTIwYjgtNGI4Zi1iMmZjLWUzOWM4M2MzYTg3OQ.jpg

 

Your check list

✔Server Hardware

✔Total Elements (Nodes /Interfaces/ Volumes)  been polled per server

✔SQL Server / Orion DB Size / Settings / Options

✔Webpages Customization

 

 

Lets collect System diagnostics as below.

Navigate to Start -> SolarWinds Orion -> Documentation and Support

Launch the gray icon for Orion Diagnostics.> Click "Start"

This program will generate a .zip file as output.

( Unzip in a folder ) Right Click >  Select Extract Here .

 

Server Hardware

Lets check your System Hardware first if this even near to the Solarwinds MINIM recommended.

Go to the SystemInformation folder > Open the SystemInfo.txt file

 

 

You will be able to find the System hardware specification  below is an example where system is only assigned with 2 Physical CPU Sockets /

below is an example where the system is only assigned two CPU PHYSICAL SOCKETS which is below Solarwinds MINIMUM recommendation .

You must have to have MINIMUM 4 PHYSICAL CPU SOCKETS here .

 

 

System Type:               x64-based PC

Processor(s):              2 Processor(s) Installed.

                           [01]: Intel64 Family 6 Model 45 Stepping 7 GenuineIntel ~1600 Mhz

                           [02]: Intel64 Family 6 Model 45 Stepping 7 GenuineIntel ~1400 Mhz

                         

                          Total Physical Memory:     49.082 MB

                          Available Physical Memory: 39.408 MB

                          Virtual Memory: Max Size:  56.250 MB

                          Virtual Memory: Available: 45.376 MB

                          Virtual Memory: In Use:    10.874 MB

 

Now open the SysInfo.csv file and check the further current CPU load on the System and CPU GHz level .

Below in an example where the CPU load in around 70% on the current system due to two main reasons .

 

Parameter

Value

OSVersion

Windows Server 2012 R2 (Microsoft Windows NT 6.2.9200.0)

CPUInformation

Intel(R) Xeon(R) CPU E5-2420 0 @ 1.90GHz

CurrentCPUUssage

70 %

TotalPhysicalMemmory

49152 MB

FreePhysicalMemmory

39802 MB

FreeVirtualMemmory

45843 MB

FreeSpaceInPagingFiles

7109 MB

CurrentTimeZone

xxxx Standard Time (UTC+01:00:00)

 

Low Physical Sockets assigned

Low CPU power less then 3.0 GHz

 

You should be able to see MINIMUM 4 Physical Processors  Sockets as below .

 

System Model:              VMware Virtual Platform

System Type:               x64-based PC

Processor(s):              4 Processor(s) Installed.

                           [01]: Intel64 Family 6 Model 15 Stepping 1 GenuineIntel ~3493 Mhz

                           [02]: Intel64 Family 6 Model 15 Stepping 1 GenuineIntel ~3493 Mhz

                           [03]: Intel64 Family 6 Model 15 Stepping 1 GenuineIntel ~3493 Mhz

                           [04]: Intel64 Family 6 Model 15 Stepping 1 GenuineIntel ~3493 Mhz

BIOS Version:              Phoenix Technologies LTD 6.00, 4/14/2014

 

 

 

Further check how much memory is assinged and available for the system and check the TaskManager which application is consuming high memory .

 

In above case the System Hardware is not even near to the recommended SolarWinds production deployment therefor the CPU load will remain high therefor System resources.

 

The following table lists minimum hardware requirements and recommendations for your SolarWinds Orion server.

Installing multiple SolarWindsOrion Platform products on the same computer may change the requirements.

Hardware requirements are listed by SolarWinds NPM license level.

These minimum requirements are for the Orion Platform. Products that run on the Orion Platform may have different requirements, such as different OS or memory requirements.

Consult your product-specific documentation for the exact requirements.

Hardware

SL100, SL250, SL500

SL2000

SLX

CPU speed

Quad core processor, 2.5 GHz or better

Quad core processor, 2.5 GHz or better

Quad core processor, 3.0 GHz or better

 

For more details see below guide

SolarWinds Orion server hardware requirements

Total Elements (Nodes /Interfaces/ Volumes)  been polled per server

Go to folder "DB" > Open file "AllEngines.csv"

 

Check how many Elements you are polling per server

EngineID

Elements

Nodes

Interfaces

Volumes

1

15828

934

6823

1071

2

16084

202

1305

77

 

With only SolarWinds SLX license you can montior up to 12000 Elements and beyond this you will need an Additional Polling Engine to monitor.

I would also strongly advise you to check the belp post for any other questions if you are polling beyond 12000 Elements with single SLX Server.

Boost your server polling capacity with Stackable Poller license

 

Orion DB Size and settings

Go to the DBInfo Folder > Open DatabaseInfo.csv file

Check the Database Recovery Mode

Check the Total Database Size

 

Default DB Recovery should be SIMPLE (Strongly recommended)

name

db_size

status

SolarWindsOrion

889274.25 MB

Recovery=FULL

 

  • I have a very large Orion database. What should I check?
  • I have database performance issues. How can i improve my database performance?
  • Why is my Orion database growing so quickly?
  • Why does my Orion performance decrease each day?
  • Why is my Orion Web Console loading data at a slow rate?

 

For more details please see the post below and follow all the steps one by one to check your Orion Database Health and settings.

This guide will help you address the most common questions and issues related to the Orion database performance check and configuration without using the SolarWinds Database Administrator (DBA).

 

Quick Orion database health check guide

Quick Orion database health check guide - SolarWinds Worldwide, LLC. Help and Support

 

Web pages recommended settings

Tips for better Orion Web Console performance - SolarWinds Worldwide, LLC. Help and Support

 

 

 

Still have any question / need assistance ?

Please feel free to submit a new support ticket in relation to your question/error. Our support lines are available 24/7.

http://www.solarwinds.com/support/ticket

You can also contact the support by 24/7  phone support .

http://www.solarwinds.com/company/contact.aspx


Viewing all articles
Browse latest Browse all 13537

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>